Frameless Shower Doors

Unfortunately, at this time we are limited to the shower door/panel configurations shown online. If you have a two-panel configuration not shown online, you can contact us to see if we can help. contact us.

Yes, we shower door hinges, door pulls, towel bars, U-Channel / Clamps that you will need for installation. You will select these during the online quoting process.

Hinges: 8″ from bottom and top.
8″ Handle: 32″ from bottom.
6″ Handle: 33″ from bottom.
Towel Bar: Matches handle height
(Anything under 66” the handle will be centered unless otherwise specified per customer drawing)

Yes, you can provide your own hardware placement dimensions

Most shower doors are 28”-30” wide however since we produce everything custom to order the choice is yours. The height of the door may limit the width but the door must be smaller than 36” wide.

All of our standard configurations do not allow fixed panels to attach to the ceiling..

Brushed Nickel
Chrome
Oil Rubbed Bronze

This is a coating that acts as an invisible protective barrier that prevents the glass from showing signs of age and build up of permanent damage.

EnduroShield is a surface sealer that reacts chemically with glass to produce a superior protection. EnduroShield makes your cleaning easier and less frequent; however it is recommended that you continue to clean the surfaces regularly.

For best results simply drying the glass with a squeegee or towel after each use will help keep the glass clean and reduce
mineral spots forming. The glass needs to be cleaned every few weeks using a damp microfibre cloth and a mild detergent to
break down soaps, oils, and conditioners on the glass. General glass cleaners are also suitable, however most of these are
finishing agents rather than cleaners, and are an added expense that is not required.

While “clear” is in the name, clear glass is not the clearest type of glass you can get.

Glass manufacturers create low iron glass by reducing the amount of iron in the molten glass formula. This type is more transparent than regular glass and it doesn’t have that greenish tint. In fact, modifying the iron content can increase the light transparency by 5 to 6 percent.

The industry-wide accepted tolerance on 3/8″ and 1/2″, +/- 1/8″.